Replace Your Blades
While sharpening your blades before winter, it’s also a good time to decided if any of your blades need replacing. If they’re completely rusted or dull, then you may want to take the extra step and get some new blades! This is especially important if you have a weed eater or chainsaw, these tools normally need their blades replaced more frequently. Most importantly, make sure you match the size and style of what came with your equipment originally.
Clean Any Debris From Gears
It’s always a good idea to clean the gears in your lawnmower and garden tools before putting them away for wintertime. Dirt, dust, and debris can cause these items not to work properly when you bring them out again next year! Use an old toothbrush or paintbrush that has been cut down into smaller pieces to get inside any tight spots on these gadgets. Cleaning off all of this dirt will help prevent clogging up parts too much which would make it difficult for anything (like oil) to circulate through each gear system.
Lubricate Moving parts
This will prevent any rust or corrosion from forming next year when you take everything out of storage again! This simple step could save a lot of time and money overall. Apply a thin layer of oil on each part where metal rubs against metal, Just remember not to use too much! You don’t want anything dripping down into the motor since this would make it harder for the lawnmower engine to start back up after sitting during wintertime. Always check with owner’s manuals if you’re unsure about which parts may need lubricating.
Apply Rust-Resistant Spray
This step is an optional one but still very important nonetheless! If you have lawnmower or garden tools that are made from steel, then it’s recommended to spray them with rust-resistant primer and topcoat. These specific spray paints are available at any hardware store and are handy to keep around for next year when it comes this time again. Just make sure to follow the instructions very carefully when spraying because if not done well this can cause more damage than good!
Store Them Properly
One last thing when putting everything away for the winter, make sure to store your equipment in an enclosed container where they are locked safely away from any moisture! Remember not to stack anything too high that could fall and cause damage. Try leaning everything up against a wall or hang long-handled equipment from studs using sturdy hooks. Also, Make sure there’s plenty of dry air circulating around each gadget so when it comes time next spring all you’ll need to do is wipe them down and put some fresh oil on the parts needing lubrication.
Conclusion
Now that you know the basics of winterizing your lawnmower and garden tools, it’s time to put them away for next year! Just remember not to get too lazy or rush any steps. If done incorrectly this could lead to big problems down the road. If you make a habit out of taking care of these items, then they will last for years to come. Following these simple instructions should help ensure everything is ready when spring finally arrives again!
