Clean Rubber Seal
Dipped the cotton cloth in white vinegar or any cleaner and removed the mold from the rubber seal.
Vacuum Dust From The Back Panel
First, before cleaning or vacuuming the back panel, go and read the manufacturer’s instructions. Then unscrew the bolts and vacuum the lint which is inside the back panel. You can use a narrow brush to clean lint from problematic areas.
Clean The Drum
In the bottom of the drum, you may find it full of dust bunnies. Put the cleaner in the interior drum, scrub it with a sponge, let it for some time, and wash it properly. After washing, set it aside to dry completely.
Clean Exterior Surface
After interior cleaning, do the exterior surface cleaning using an all-purpose cleaner and warm water. After that, wipe it down with a microfiber cloth properly. Once everything is done, reattach the ducts, back panel, hoses, and plug it back in.
Extra Tips To Keep Your Washer And Dryer Clean
-
- Always leave the washing machine door open for some time after washing so that the washer and dryer dry properly. By leaving the door open, the retained moisture in the washer and dryer will evaporate, and you can avoid the growth of mold and mildew.
- Always try to avoid storing fabric softener or cloth in the washer and dryer. Instead, remove the clothes asap after washing or drying. Because if you store them in the washer and dryer for a long time, then fabric softeners will leave residue in the washer and dryer and other clothes.
- Always use a limited amount of detergent in the washing machine because different use of detergent will cling to the washer walls, which leads to boring and odorous clothes.
